- Home
- ›
- Standard Splitters
- ›
- LDCBS1X2 GNSS ANTENNA SPLITTER
Products
- GNSS | GPS REPEATERS
- GNSS | GPS AMPLIFIERS
- GNSS | GPS ANTENNAS
- CHIP SCALE ATOMIC CLOCK
- GNSS | GPS INFRASTRUCTURE
- GPS INTERFERENCE DETECTION
- GNSS | GPS MILITARY SYSTEMS
- GNSS Receivers
- BlueSky GNSS Firewall
- GNSS | GPS Timing
- GPS RF over Fibre Optic Comms
- Constellator GNSS Simulator
- GNSS RECORDER AND PLAYER
- GNSS | GPS Underground
- GPS Splitters
LDCBS 1X2 Mini GPS Splitter

Product Information
GPS Networking’s mini-LDCBS1X2 GPS/GNSS splitter is a compact one input, two output device based on the Wilkinson splitter design. The frequency response covers the entire L-band (all GNSS frequencies) with excellent gain flatness. In the standard configuration, (J1) passes DC from the connected GPS device through the splitter to the input (antenna port). The other RF output (J2) is DC blocked and loaded with a 200Ω resistor to simulate the antenna current draw to prevent false antenna alarm faults. The mini-LDCBS1X2 GPS/GNSS splitter is available with SMA connectors, with weather proofing and hermetically sealed options.
Key Features
Amplitude balance
| J1-J2 | < 1.0dB
Extremely flat group delay
Less than 1ns variation
Low insertion loss
Passes all GNSS frequencies (entire L-band)
DC blocked outputs feature 200Ω antenna simulator loads
Phase matched outputs- phase (J1-J2) < 1.0°