- Home
- ›
- Standard Splitters
- ›
- S12S-1X2 SLIMLINE GPS SPLITTER
Products
- GNSS | GPS REPEATERS
- GNSS | GPS AMPLIFIERS
- GNSS | GPS ANTENNAS
- Embedded Atomic Clocks
- GNSS | GPS INFRASTRUCTURE
- GPS INTERFERENCE DETECTION
- GNSS | GPS MILITARY SYSTEMS
- GNSS Receivers
- BlueSky GNSS Firewall
- GNSS | GPS Timing
- GPS RF over Fibre Optic Comms
- GNSS | GPS Simulators
- GNSS RECORDER AND PLAYER
- GNSS | GPS Underground
- GPS Splitters
S12S Slimline GPS Splitter
Product Information
Key Features
Datasheets
Product Information
Product Information
e S12S GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200 Ohm DC load to simulate an antenna DC current draw for any receiver connected to that port.
- Amplified and Passive Versions Available
- Frequency response for GPS L1/L2, Galileo, & GLONASS
- Excellent Gain Flatness
- Gain |L1-L2| < 2dB
- RoHS/WEEE Compliant
- Designed to MIL-STD-810
Key Features
Key Features
- Amplified and Passive Versions Available
- Frequency response for GPS L1/L2, Galileo, & GLONASS
- Excellent Gain Flatness
- Gain |L1-L2| < 2dB
- RoHS/WEEE Compliant
- Designed to MIL-STD-810
Datasheets
Datasheets
- Amplified and Passive Versions Available
- Frequency response for GPS L1/L2, Galileo, & GLONASS
- Excellent Gain Flatness
- Gain |L1-L2| < 2dB
- RoHS/WEEE Compliant
- Designed to MIL-STD-810